Lifting clamp Steel Horizontal Plate Vertical Type, Used For Lifting And Transporting, Vertical Jaw Opening Fixing device(1)

Instructions for use of stone plate clampStep 1: Hang the plate clamp and the lifting equipment together.Step 2: lift the plate clamp into the goods, generally stone.Step 3: Open the closing switch as shown by the arrow, lift the lifting clamp up, the clamp is closed, and the goods are clamped.Step 4: lift the goods, move the goods to the designated position and lower them.Step 5: After putting the goods down, the closing switch will automatically close.Step 6: Lift the plate clamp up, remove the plate clamp, and complete the operation.

• [Steel Horizontal Plate Lifting Clamp]: Made of premium low-carbon alloy steel with plastic spraying, this plate clamp is resilient and stable
• [Adjustable opening size]: The size of the opening is marked on the side of the product. The size of the opening can be adjusted freely and conveniently
• [Anti-fall safety plug]: Pull out the safety plug before use, adjust the chain to a proper position, and then plug the safety plug back.
• [Spring Device]: Our plate lifting clamp has spring device for tight locking which may ensure plates from slipping
• Lifting clamps: Vertical steel plate clamps are used for vertical lifting and transportation of steel plates and structures.